מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםפרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ
עד 7 ימי עסקים בלבד
בהזמנות מעל 2000 ש״ח
הכוונה וייעוץ לפני רכישה
בהזמנות אונליין באתר
PLANET BSP-115PV-15A — מתג PoE סולארי. משלב תקשורת Ethernet והזנת PoE במערכת המבוססת על מקורות האנרגיה הנתמכים בדגם. הוא מיועד לפרויקטים שבהם צריך להפעיל ציוד רשת באתר מרוחק ולתכנן יחד את קישור הנתונים ואת אספקת החשמל.
Solar-Powered PoE Switch. PLANET BSP-115PV-15A combines Ethernet connectivity and PoE power in a system using the energy sources supported by this model. It is intended for remote installations where the network connection and power supply must be designed together.
PLANET BSP-115PV-15A · פתרונות PoE תעשייתיים
PLANET BSP-115PV-15A משלב תקשורת Ethernet והזנת PoE במערכת המבוססת על מקורות האנרגיה הנתמכים בדגם. הוא מיועד לפרויקטים שבהם צריך להפעיל ציוד רשת באתר מרוחק ולתכנן יחד את קישור הנתונים ואת אספקת החשמל.
5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
1 100/1000BASE-X SFP ports
IEEE 802.3at Power over Ethernet PSE
Maximum 120W (depending on power input)
Supports 20-27V solar panel input (open circuit voltage) with 12V battery, maximum solar panel input power of 405W, and maximum circuit 15A. Supports 32-45V solar panel input (open circuit voltage) with 24V battery, maximum solar panel input power of 675W, and maximum circuit 15A.
Desktop/Wall-mount ear
במערכת סולארית מתאימים את הפאנל, המצבר, מתחי העבודה וזרם הטעינה לדגם המדויק. זמן העבודה תלוי בצריכת הציוד, בקיבולת המצבר ובתנאי הטעינה. ציוד חיצוני ואביזרי מערכת נבחרים כחלק מתכנון הפרויקט.
טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET BSP-115PV-15A combines Ethernet connectivity and PoE power in a system using the energy sources supported by this model. It is intended for remote installations where the network connection and power supply must be designed together.
Match the solar panel, battery, operating voltages and charging current to the exact model. Runtime depends on device consumption, battery capacity and charging conditions. External equipment and system accessories must be selected as part of the project design.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET BSP-115PV-15A |
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP Port | 1 100/1000BASE-X SFP ports |
| Connector | Removable 6-pin terminal block Pin 1/2(+/-) , 3/4(+/-) for PV panel (In parallel); Pin 5/6(-/+) for battery charging and discharging The PV input is compliant with DC input but cannot be connected simultaneously with solar input to prevent damage to the device. |
| DIP Switch | Front Panel: Alive Check: All PoE ports enable PD Alive check function. VLAN: Port isolation Extend: Long distance PoE switch. Rear Panel: PWR: Equipment power switch BAT: Battery type switch BV: Battery voltage switch LiFe: Lithium iron phosphate switch |
| Power Requirements | Supports 20-27V solar panel input (open circuit voltage) with 12V battery, maximum solar panel input power of 405W, and maximum circuit 15A. Supports 32-45V solar panel input (open circuit voltage) with 24V battery, maximum solar panel input power of 675W, and maximum circuit 15A. |
| Charging Function | Integrated automatic charging and discharging, maximum efficiency 98%, maximum charging current 15A Integrated battery protection function Integrated battery float charging function Supports over-temperature protection function |
| Battery Type | Based on Full Loading power consumption: 12V / 24V lead-acid battery, maximum charging current 15A 12.6V/25. 2V lithium battery, maximum charging current 15A 14.6V/29.2V lithium iron battery, maximum charging current 15A Note: Recommended capacity 500AH in fully power 120W usage |
| Power Consumption/ Dissipation | 3 watts, 10.2BTU (Standby without PoE function) 140 watts, 477 BTU (Full loading with PoE function) |
| Dimensions (W x D x H) | 196.72 x 141.8 x 34 mm |
| Weight | 820g |
| LCD Monitor (W x D) | 26.77 x 16 mm, 1.1-inch |
| Temperature Sensor | Temperature Detector -20 ~ 120 degrees C Humidity Detector 0 ~ 100 % RH |
| ESD Protection | ±8KV air gap discharge ±4KV contact discharge |
| Surge Immunity | 2KV |
| Enclosure | IP30 metal case |
| Installation | Desktop/Wall-mount ear |
| LED Indicators | Front Panel: System: Green : PWR ,BAT.out,BAT.in Per 10/100/1000T RJ45 Port: (Port 1~Port 3): Green : LNK/ACT (10/100/1000Mbps) Amer : PoE-in-use Per 10/100/1000T RJ45 Port: (Port 4~Port 5): Green : LNK/ACT (10/100/1000Mbps) Amer : 1000Mbps Green : PoE-in-use Per SFP Port: (Port 6): Green : LNK/ACT (100/1000Mbps) Rear Panel: System: Green : SYS, PWR, PV in Battery: Green : BAT.out, BAT.in, BAT.V in |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 12Gbps/non-blocking |
| Switch Throughput | 8.92Mpps@64 bytes |
| MAC Address Table | 2K entries |
| Shared Data Buffer | 2.5Mb |
| Jumbo Frame | 10K bytes |
| PoE Standard | IEEE 802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 48V DC, max. 35 watts |
| Power Pin Assignment | Port 1: 1/2 (+), 3/6 (-), 4/5(+), 7/8(-) Ports 2~5: 1/2 (+), 3/6 (-) |
| PoE Power Budget | Maximum 120W (depending on power input) |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy-Efficient Ethernet |
| Operating | Temperature: -20 ~ 65 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Model | BSP-115PV-15A |
|---|---|
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP Port | 1 100/1000BASE-X SFP ports |
| Connector | Removable 6-pin terminal block Pin 1/2(+/-) , 3/4(+/-) for PV panel (In parallel); Pin 5/6(-/+) for battery charging and discharging The PV input is compliant with DC input but cannot be connected simultaneously with solar input to prevent damage to the device. |
| DIP Switch | Front Panel: Alive Check: All PoE ports enable PD Alive check function. VLAN: Port isolation Extend: Long distance PoE switch. Rear Panel: PWR: Equipment power switch BAT: Battery type switch BV: Battery voltage switch LiFe: Lithium iron phosphate switch |
| Power Requirements | Supports 20-27V solar panel input (open circuit voltage) with 12V battery, maximum solar panel input power of 405W, and maximum circuit 15A. Supports 32-45V solar panel input (open circuit voltage) with 24V battery, maximum solar panel input power of 675W, and maximum circuit 15A. |
| Charging Function | Integrated automatic charging and discharging, maximum efficiency 98%, maximum charging current 15A Integrated battery protection function Integrated battery float charging function Supports over-temperature protection function |
| Battery Type | Based on Full Loading power consumption: 12V / 24V lead-acid battery, maximum charging current 15A 12.6V/25. 2V lithium battery, maximum charging current 15A 14.6V/29.2V lithium iron battery, maximum charging current 15A Note: Recommended capacity 500AH in fully power 120W usage |
| Power Consumption/ Dissipation | 3 watts, 10.2BTU (Standby without PoE function) 140 watts, 477 BTU (Full loading with PoE function) |
| Dimensions (W x D x H) | 196.72 x 141.8 x 34 mm |
| Weight | 820g |
| LCD Monitor (W x D) | 26.77 x 16 mm, 1.1-inch |
| Temperature Sensor | Temperature Detector -20 ~ 120 degrees C Humidity Detector 0 ~ 100 % RH |
| ESD Protection | ±8KV air gap discharge ±4KV contact discharge |
| Surge Immunity | 2KV |
| Enclosure | IP30 metal case |
| Installation | Desktop/Wall-mount ear |
| LED Indicators | Front Panel: System: Green : PWR ,BAT.out,BAT.in Per 10/100/1000T RJ45 Port: (Port 1~Port 3): Green : LNK/ACT (10/100/1000Mbps) Amer : PoE-in-use Per 10/100/1000T RJ45 Port: (Port 4~Port 5): Green : LNK/ACT (10/100/1000Mbps) Amer : 1000Mbps Green : PoE-in-use Per SFP Port: (Port 6): Green : LNK/ACT (100/1000Mbps) Rear Panel: System: Green : SYS, PWR, PV in Battery: Green : BAT.out, BAT.in, BAT.V in |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 12Gbps/non-blocking |
| Switch Throughput | 8.92Mpps@64 bytes |
| MAC Address Table | 2K entries |
| Shared Data Buffer | 2.5Mb |
| Jumbo Frame | 10K bytes |
| PoE Standard | IEEE 802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 48V DC, max. 35 watts |
| Power Pin Assignment | Port 1: 1/2 (+), 3/6 (-), 4/5(+), 7/8(-) Ports 2~5: 1/2 (+), 3/6 (-) |
| PoE Power Budget | Maximum 120W (depending on power input) |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy-Efficient Ethernet |
| Operating | Temperature: -20 ~ 65 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק
