מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםפרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ
עד 7 ימי עסקים בלבד
בהזמנות מעל 2000 ש״ח
הכוונה וייעוץ לפני רכישה
בהזמנות אונליין באתר
PLANET IFGS-1222TF — מתג תעשייתי לא מנוהל. מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.
Industrial Unmanaged Ethernet Switch. PLANET IFGS-1222TF connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.
PLANET IFGS-1222TF · מתגים תעשייתיים
PLANET IFGS-1222TF מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.
DC 9~48V or AC 24V Redundant power with reverse polarity protection
DIN-rail kit and wall-mount ear
IP30-rated metal case
Operating: -40~75 degrees C Storage: -40~75 degrees C
בתכנון ארון תקשורת למפעל, מערכת בקרה או תשתית אבטחה, חשוב להתאים את מספר החיבורים ואת רוחב הפס לכל קצה. חיבורי Uplink, כאשר הם קיימים בדגם, משמשים לקישור לשאר הרשת. בממשק SFP יש להתאים את המודול, סוג הסיב ואורך הקו לשני קצות הקישור.
טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET IFGS-1222TF connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.
For factory networks, control systems and surveillance infrastructure, plan both the number of device connections and the uplink capacity. Where SFP interfaces are provided, the transceiver type, fiber type and link distance must match the equipment at both ends. Copper and fiber ports are listed separately to make this planning easier.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET IFGS-1222TF |
| 10/100TX Copper Ports | 8 x 10/100BASE-TX RJ45 TP Auto-MDI/MDI-X, auto-negotiation, Port 1 to Port 8 |
| 10/100/1000T Copper Ports | 2 x 10/100/1000BASE-T RJ45 TP Auto-MDI/MDI-X, auto-negotiation, Port 9 to Port 10 |
| 1000X SFP Slots | 2 x 1000BASE-X SFP interfaces, Port 11 to Port 12 |
| DIP Switch | DIP Switch Position Function Mode OFF Ring ON (default) Switch Mode Note : 1.Power off the IFGS-1222TF before adjusting the DIP switch and then power it on. 2.With a simple ring network with 8 units, the recovery time of data link can be as fast as 1ms. 3.Ring performance may vary depending on the length of the fiber optic and UTP cables. |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Alarm | Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V |
| ESD Protection | ±6KV air gap discharge ±6KV contact discharge |
| Surge Immunity | 6KV DC |
| Enclosure | IP30-rated metal case |
| Installation | DIN-rail kit and wall-mount ear |
| Dimensions (W x D x H) | 50 x 86.4 x 135 mm |
| Weight | 545g |
| Power Requirements | DC 9~48V or AC 24V Redundant power with reverse polarity protection |
| Power Consumption / Dissipation (Full Loading) | DC 9V: 4.6 watts/15.6BTU DC 48V: 6 watts/20.4BTU AC 24V: 5.7 watts/19.4BTU |
| LED | 3 x LED for System and Power: Green : DC Power 1 Green : DC Power 2 Red : Alarm 1x LED for Per Copper Port (Port-1~Port-8): Green : 10/100 LNK/ACT 2 x LED for Per Copper Port (Port-9~Port-10): Green : LNK/ACT Amber : 1000 1 x LED for Per SFP interface (Port-11~Port-12): Green : 1G LNK/ACT |
| Switch Processing Scheme | Store-and-Forward |
| Switch Fabric | 9.6Gbps |
| Throughput (packet per second) | 7.14Mpps@64bytes |
| Address Table | 4K entries |
| Jumbo Frame | 16K bytes |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Standards Compliance | IEEE 802.3 Ethernet 10BASE-T IEEE 802.3u Fast Ethernet 100BASE-TX IEEE 802.3ab Gigabit Ethernet 1000BASE-T IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.1p Class of Service (Works under Ring function disable) PROFINET Traffic Pass-through with QoS |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27(Shock) IEC60068-2-6 (Vibration) |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) |
| Model | IFGS-1222TF |
|---|---|
| 10/100TX Copper Ports | 8 x 10/100BASE-TX RJ45 TP Auto-MDI/MDI-X, auto-negotiation, Port 1 to Port 8 |
| 10/100/1000T Copper Ports | 2 x 10/100/1000BASE-T RJ45 TP Auto-MDI/MDI-X, auto-negotiation, Port 9 to Port 10 |
| 1000X SFP Slots | 2 x 1000BASE-X SFP interfaces, Port 11 to Port 12 |
| DIP Switch | DIP Switch Position Function Mode OFF Ring ON (default) Switch Mode Note : 1.Power off the IFGS-1222TF before adjusting the DIP switch and then power it on. 2.With a simple ring network with 8 units, the recovery time of data link can be as fast as 1ms. 3.Ring performance may vary depending on the length of the fiber optic and UTP cables. |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Alarm | Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V |
| ESD Protection | ±6KV air gap discharge ±6KV contact discharge |
| Surge Immunity | 6KV DC |
| Enclosure | IP30-rated metal case |
| Installation | DIN-rail kit and wall-mount ear |
| Dimensions (W x D x H) | 50 x 86.4 x 135 mm |
| Weight | 545g |
| Power Requirements | DC 9~48V or AC 24V Redundant power with reverse polarity protection |
| Power Consumption / Dissipation (Full Loading) | DC 9V: 4.6 watts/15.6BTU DC 48V: 6 watts/20.4BTU AC 24V: 5.7 watts/19.4BTU |
| LED | 3 x LED for System and Power: Green : DC Power 1 Green : DC Power 2 Red : Alarm 1x LED for Per Copper Port (Port-1~Port-8): Green : 10/100 LNK/ACT 2 x LED for Per Copper Port (Port-9~Port-10): Green : LNK/ACT Amber : 1000 1 x LED for Per SFP interface (Port-11~Port-12): Green : 1G LNK/ACT |
| Switch Processing Scheme | Store-and-Forward |
| Switch Fabric | 9.6Gbps |
| Throughput (packet per second) | 7.14Mpps@64bytes |
| Address Table | 4K entries |
| Jumbo Frame | 16K bytes |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Standards Compliance | IEEE 802.3 Ethernet 10BASE-T IEEE 802.3u Fast Ethernet 100BASE-TX IEEE 802.3ab Gigabit Ethernet 1000BASE-T IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.1p Class of Service (Works under Ring function disable) PROFINET Traffic Pass-through with QoS |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27(Shock) IEC60068-2-6 (Vibration) |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק
