מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםפרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ
עד 7 ימי עסקים בלבד
בהזמנות מעל 2000 ש״ח
הכוונה וייעוץ לפני רכישה
בהזמנות אונליין באתר
PLANET IXT-900-2X1PD — ממיר תקשורת תעשייתי. מקשר בין ממשקי התקשורת המפורטים עבור הדגם. הוא מאפשר לשלב מקטעי רשת בעלי חיבורים שונים בתוך אותה תשתית, תוך התאמה למהירות, לסוג המדיה ולמרחק העבודה הנדרש.
Industrial Media Converter. PLANET IXT-900-2X1PD connects the communication interfaces specified for this model. It integrates network segments that use different media or connectors, subject to the supported speed, transceiver type and link distance.
PLANET IXT-900-2X1PD · ממירים אופטיים ותקשורת תעשייתית
PLANET IXT-900-2X1PD מקשר בין ממשקי התקשורת המפורטים עבור הדגם. הוא מאפשר לשלב מקטעי רשת בעלי חיבורים שונים בתוך אותה תשתית, תוך התאמה למהירות, לסוג המדיה ולמרחק העבודה הנדרש.
One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function
9~48V DC, 24V AC or PoE input
Wall-mount and DIN-rail kit installation
IP40 metal case
Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
בבחירת ממיר בודקים את סוג המחברים בשני הקצוות ואת מהירות הקישור. בחיבור אופטי יש להתאים Single-mode או Multi-mode, אורך גל ומרחק; בדגמי SFP בוחרים מודול תואם. בדגמי SPE נדרשת התאמה לתקן Single Pair Ethernet ולמחבר הייעודי.
טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET IXT-900-2X1PD connects the communication interfaces specified for this model. It integrates network segments that use different media or connectors, subject to the supported speed, transceiver type and link distance.
Check the connectors and link speed at both ends. For fiber links, match single-mode or multimode fiber, wavelength and distance; SFP models require a compatible transceiver. SPE models require matching Single Pair Ethernet equipment and connectors.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET IXT-900-2X1PD |
| Copper Interface | One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function |
| PoE PD | Yes |
| Fiber Interface | Two 10G/2.5G/1G/100BASE-X SFP+ interfaces |
| Reset Button | < 5 sec.: System reboot > 5 sec.: Factory default |
| Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for Alarm, Pin 5/6 for Power 2 |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24VDC |
| Enclosure | IP40 metal case |
| ESD Protection | 4KVDC Contact / 8KVDC Air |
| Installation | Wall-mount and DIN-rail kit installation |
| Dimensions (W x D x H) | 50 x 86.4 x 135mm |
| Weight | 604g |
| Power Requirement | 9~48V DC, 24V AC or PoE input |
| Power Consumption | 3.9W/13.3 BTU (No Loading) / 9.5W/32.4 BTU (Full Loading) |
| LED Indicator | System: PWR 1 ( Green ) PWR 2 ( Green ) Alarm ( Red ) Per 10GBASE-T RJ45 Port: 1G/100 LINK/ACT ( Green ) 2.5G/5G LINK/ACT ( Green ) 10G LINK/ACT ( Amber ) Per 10GBASE-X SFP+ Port: 1G LINK/ACT ( Green ) 2.5G LINK/ACT ( Green ) 10G LINK/ACT ( Amber ) |
| Processing Scheme | Store and Forward |
| Fabric | 60Gbps |
| Throughput (packet per second) | 29.76Mpps@64bytes |
| Address Table | 16K entries, automatic source address learning and aging |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Jumbo Frame | 9K |
| Shared Buffer | 12Mbits |
| Port Configuration | Port disable/enable Auto-negotiation 100Mbps, 1/2.5/5/10Gbps full and half duplex mode selection Flow control disable/enable |
| Port Status | Display each port’s link status, speed, Auto-negotiation status, duplex mode, flow control status |
| VLAN | IEEE 802.1Q tag-based VLAN IEEE 802.1ad Q-in-Q tunneling Up to 256 VLAN groups, out of 4096 VLAN IDs |
| Bandwidth Control | Per port bandwidth control Ingress: 16~10,000,000Kbps Egress: 16~10,000,000Kbps |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching Traffic classification: Cos/802.1p DSCP IP Precedence |
| Ring | Supports ERPS, and complies with ITU-T G.8032 Recovery time < 450ms |
| Access Security | Remote management protocols support: SSH, Telnet, HTTP and HTTPs Protected ports |
| Basic Management Interfaces | Telnet, Web browser, SNMP v1, v2c |
| Secure Management Interfaces | SSHv2, TLSv1.2, SNMPv3 |
| System Management | Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP LLDP protocol SNTP PLANET Smart Discovery Utility PLANET NMS Controller PLANET CloudViewerPro mobile app |
| Event Management | Remote syslog Local system log SNMP trap |
| SNMP MIBs | RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 3411 SNMP-Frameworks-MIB LLDP MAU-MIB |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3u, 100BASE-TX/FX IEEE 802.3ab, 1000BASE-T IEEE 802.3bz, 2.5G/5GBASE-T IEEE 802.3an, 10GBASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3ae 10GBASE-SR/LR IEEE 802.3x full-duplex flow control IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1ab LLDP RFC 768 UDP RFC 2474 DSCP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP ITU-T G.8032 ERPS Ring |
| Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Model | IXT-900-2X1PD |
|---|---|
| Copper Interface | One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function |
| PoE PD | Yes |
| Fiber Interface | Two 10G/2.5G/1G/100BASE-X SFP+ interfaces |
| Reset Button | < 5 sec.: System reboot > 5 sec.: Factory default |
| Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for Alarm, Pin 5/6 for Power 2 |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24VDC |
| Enclosure | IP40 metal case |
| ESD Protection | 4KVDC Contact / 8KVDC Air |
| Installation | Wall-mount and DIN-rail kit installation |
| Dimensions (W x D x H) | 50 x 86.4 x 135mm |
| Weight | 604g |
| Power Requirement | 9~48V DC, 24V AC or PoE input |
| Power Consumption | 3.9W/13.3 BTU (No Loading) / 9.5W/32.4 BTU (Full Loading) |
| LED Indicator | System: PWR 1 ( Green ) PWR 2 ( Green ) Alarm ( Red ) Per 10GBASE-T RJ45 Port: 1G/100 LINK/ACT ( Green ) 2.5G/5G LINK/ACT ( Green ) 10G LINK/ACT ( Amber ) Per 10GBASE-X SFP+ Port: 1G LINK/ACT ( Green ) 2.5G LINK/ACT ( Green ) 10G LINK/ACT ( Amber ) |
| Processing Scheme | Store and Forward |
| Fabric | 60Gbps |
| Throughput (packet per second) | 29.76Mpps@64bytes |
| Address Table | 16K entries, automatic source address learning and aging |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Jumbo Frame | 9K |
| Shared Buffer | 12Mbits |
| Port Configuration | Port disable/enable Auto-negotiation 100Mbps, 1/2.5/5/10Gbps full and half duplex mode selection Flow control disable/enable |
| Port Status | Display each port’s link status, speed, Auto-negotiation status, duplex mode, flow control status |
| VLAN | IEEE 802.1Q tag-based VLAN IEEE 802.1ad Q-in-Q tunneling Up to 256 VLAN groups, out of 4096 VLAN IDs |
| Bandwidth Control | Per port bandwidth control Ingress: 16~10,000,000Kbps Egress: 16~10,000,000Kbps |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching Traffic classification: Cos/802.1p DSCP IP Precedence |
| Ring | Supports ERPS, and complies with ITU-T G.8032 Recovery time < 450ms |
| Access Security | Remote management protocols support: SSH, Telnet, HTTP and HTTPs Protected ports |
| Basic Management Interfaces | Telnet, Web browser, SNMP v1, v2c |
| Secure Management Interfaces | SSHv2, TLSv1.2, SNMPv3 |
| System Management | Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP LLDP protocol SNTP PLANET Smart Discovery Utility PLANET NMS Controller PLANET CloudViewerPro mobile app |
| Event Management | Remote syslog Local system log SNMP trap |
| SNMP MIBs | RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 3411 SNMP-Frameworks-MIB LLDP MAU-MIB |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3u, 100BASE-TX/FX IEEE 802.3ab, 1000BASE-T IEEE 802.3bz, 2.5G/5GBASE-T IEEE 802.3an, 10GBASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3ae 10GBASE-SR/LR IEEE 802.3x full-duplex flow control IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1ab LLDP RFC 768 UDP RFC 2474 DSCP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP ITU-T G.8032 ERPS Ring |
| Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק
