מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםפרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ
עד 7 ימי עסקים בלבד
בהזמנות מעל 2000 ש״ח
הכוונה וייעוץ לפני רכישה
בהזמנות אונליין באתר
PLANET VCG-2406WP-NR — נתב סלולרי תעשייתי 5G. מחבר ציוד ורשתות מקומיות לתקשורת סלולרית. זהו פתרון לאתרים שבהם נדרש קישור נתונים דרך רשת המפעיל, עם ממשקי הרשת והתקשורת של הדגם כמפורט במפרט.
Industrial 5G Cellular Gateway. PLANET VCG-2406WP-NR links local equipment and networks through a cellular data connection. It is intended for installations that need connectivity through a mobile operator, using the Ethernet and wireless interfaces specified for this model.
PLANET VCG-2406WP-NR · נתבים תעשייתיים
PLANET VCG-2406WP-NR מחבר ציוד ורשתות מקומיות לתקשורת סלולרית. זהו פתרון לאתרים שבהם נדרש קישור נתונים דרך רשת המפעיל, עם ממשקי הרשת והתקשורת של הדגם כמפורט במפרט.
Total: 4 × 10/100/1000BASE-T Ethernet ports, M12 8-pin X-coded female connectors Port assignments: Ports 1–2: LAN ports with IEEE 802.3at PoE (PSE) Port 3: Dedicated LAN port Port 4: Configurable LAN/WAN port
IEEE 802.3af / 802.3at PoE+ PSE
60 watts (max.)
Input voltage: 9–54 V DC
Desktop Wall-mount
IP50 aluminum case
אפשר לשלב את הנתב בארונות תקשורת ובמערכות ניטור ובקרה מרוחקות. לפני ההזמנה מתאימים את גרסת התדרים, כרטיס ה־SIM, שירות הנתונים והאנטנות למיקום ההתקנה ולמפעיל. דגמי EU ו־US הם גרסאות שונות; יש לבדוק את רשימת התדרים של הדגם המדויק.
טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET VCG-2406WP-NR links local equipment and networks through a cellular data connection. It is intended for installations that need connectivity through a mobile operator, using the Ethernet and wireless interfaces specified for this model.
Applications include remote monitoring, control equipment and distributed network installations. Match the regional radio version, SIM, data service and antennas to the operator and installation location. EU and US variants are different configurations; use the exact band list shown for the selected model.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET VCG-2406WP-NR |
| Copper Ports | Total: 4 × 10/100/1000BASE-T Ethernet ports, M12 8-pin X-coded female connectors Port assignments: Ports 1–2: LAN ports with IEEE 802.3at PoE (PSE) Port 3: Dedicated LAN port Port 4: Configurable LAN/WAN port |
| SIM Interface | 2 SIM card slots supporting Nano-SIM |
| Cellular Antenna | 4 × 5 dBi gain external antennas, SMA-type connectors, for 5G NR |
| Wireless Antenna | 2 × 2.4GHz and 5GHz dual-band external antennas with RP-SMA female connectors for Wi-Fi peak gain: 4.33 dBi @2.4GHz, 4.47 dBi @5GHz |
| DI & DO Interfaces | 1 x M12 A-coded 5-pin male connector for DI/DO and alarm interface Pin 1 for DI and Pin 2 for DO Pin 3/4 for Alarm Pin 5 for GND |
| Alarm | One relay output for port breakdown and power failure. Alarm relay current carry ability: 1A @ 24V DC |
| Digital Input (DI) | One digital input (DI) Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input load to 24V DC, 10mA max. |
| Digital Output (DO) | One digital output (DO) Open collector to 24V DC, 100mA max. |
| Power Connector | Connector type: M12 K-coded, 5-pin female Pin assignment: Pin 1: V1- Pin 2: V1+ Pin 3: V2+ Pin 4: V2− Pin PE: GND |
| Number of Power Input | 2 |
| Power Requirements | Input voltage: 9–54 V DC |
| Power Consumption | Max.10.2 watts/34.8BTU (Power on without any connection) Max. 81 watts/276.38 BTU (Full loading) |
| Enclosure | IP50 aluminum case |
| Reset Button | Press < 5 seconds: System reboot Press > 5 seconds: Restore factory default settings |
| Installation | Desktop Wall-mount |
| Weight | 1725g |
| Dimensions | 245 × 140.5 × 60 mm (W × D × H) |
| LED Indicators | System P1 ( Green ): Power 1 status P2 ( Green ): Power 2 status Alarm ( Red ): System alarm indicator I/O ( Red ): Digital input/output status Ethernet Interfaces (Ports 1–4) 10/100/1000 LNK/ACT ( Green ): Link/activity at 10/100/1000 Mbps PoE PoE ( Amber ): Link/activity Wi-Fi 2.4G ( Green ): 2.4 GHz Wi-Fi status 5G ( Green ): 5 GHz Wi-Fi status Cellular SIM SIM1 ( Green ): SIM card 1 status SIM2 ( Green ): SIM card 2 status Cellular Signal Strength 4 levels ( Green ): Indicates signal strength (1–4 LEDs lit) |
| 5G | NSA: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 SA: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 |
| LTE | LTE-FDD: B1/ 2/ 3/ 4/ 5/ 7/ 8/ 12/ 13/ 14/ 17/ 18/ 19/ 20/ 25/ 26/ 28/ 29/ 30/ 32/ 66/ 71 LTE-TDD: B34/ 38/ 39/ 40/ 41/ 42/ 43/ 48 LAA: B46 |
| UMTS/WCDMA | B1/ 2/ 4/ 5/ 8/ 19 |
| GNSS | GPS/ GLONASS/ BDS/ Galileo/ QZSS |
| Data Transmission Throughput | 5G SA Sub-6 data rate Max. 2.4 Gbps (DL) / Max. 900 Mbps (UL) 5G NSA Sub-6 data rate Max. 3.4 Gbps (DL) / Max. 550 Mbps (UL) LTE data rate Max. 1.6 Gbps (DL) / Max. 200 Mbps (UL) WCDMA data rate Max. 42 Mbps (DL) / Max. 5.76 Mbps (UL) |
| PoE Standard | IEEE 802.3af / 802.3at PoE+ PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 54V DC, 36 watts (max.) |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Budget | 60 watts (max.) |
| Max. Number of Class 4 PDs | 2 |
| PoE Management | PD Alive Check Scheduled Power Recycling PoE Schedule PoE Usage Monitoring |
| Standard | IEEE 802.11a/n/ac/ax (5 GHz) IEEE 802.11g/b/n/ax (2.4 GHz) |
| Band Mode | 2.4 GHz and 5 GHz concurrent mode |
| Frequency Range | 2.4GHz FCC: 2.412~2.462GHz ETSI: 2.412GHz~2.472GHz 5GHz FCC: 5.150 – 5.850 GHz ETSI: 5.150 – 5.725 GHz |
| Operating Channels | 2.4GHz FCC: Channels 1–11 ETSI: Channels 1–13 5GHz FCC Non-DFS: 36, 40, 44, 48, 149, 153, 157, 161, 165 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 ETSI Non-DFS: 36, 40, 44, 48 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Note: 5 GHz channel availability may vary by country according to local regulations. |
| Modulation Type | 802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM) 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Channel Width | 20 MHz, 40 MHz, 80 MHz |
| Data Transmission Rates | Transmit: 600 Mbps* for 2.4 GHz and 1200 Mbps* for 5 GHz Receive: 600 Mbps* for 2.4 GHz and 1200 Mbps* for 5 GHz *The estimated transmission distance is based on the theory. The actual distance will vary in different environments. |
| Transmission Power | 11b:23 dBm ±1.5 dBm @11Mbps 11g:20 dbm ±1.5 dBm @54Mbps 11g/n:20 dBm ±1.5 dBm @MCS7, HT20 17 dBm@MCS7,HT40 11a:19.5 dBm ±1.5 dBm @54Mbps 11a/n:19.5 dBm ±1.5 dBm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20 dBm ±1.5 dBm @MCS8 11ac HT40: 17 dBm ±1.5 dBm @MCS9 11ac HT80: 14.5 dBm ±1.5 dBm @MCS9 11ax HT20: 20 dBm ±1.5 dBm @MCS9 11ax HT40: 17 dBm ±1.5 dBm @MCS9 11ax HT80: 14.5 dBm ±1.5 dBm @MCS11 |
| Encryption Security | WEP: 64/128-bit encryption WPA / WPA2: TKIP / AES encryption WPA-PSK / WPA2-PSK: TKIP / AES encryption WPA3-PSK (SAE): AES encryption only 802.1X Authenticator |
| Wireless Advanced | Wi-Fi Multimedia (WMM) Auto channel selection Wireless output power management MAC address filtering |
| Maximum Managed APs | 128 |
| Maximum AP Groups | 10 |
| Maximum APs per AP Group | 128 |
| Wireless Encryption/Security | WEP encryption security WPA Personal / Enterprise (TKIP / AES) WPA2 Personal / Enterprise (TKIP / AES) WPA3 Personal Enterprise Class 802.1x |
| AP Auto Discovery | Supports AP auto discovery |
| SSID/RF Profile | Allows multiple wireless profiles creation and maintenance |
| Cluster Management | Allows AP grouping for bulk provisioning and batch upgrading |
| Bulk AP Provisioning | Supports bulk AP provisioning with user-defined profiles |
| Bulk AP Firmware Upgrade | Supports bulk AP firmware upgrade |
| Coverage Heat Map | Enables real signal coverage of managed AP reflecting on the uploaded zone maps |
| Status Monitoring | Real-time traffic statistics reporting of AP and activated clients |
| Graphical Statistics | Real-time and historical visibility of traffic flow [2] |
| Profile Backup/Restoration | Provides SSID, radio profile backup/restoration |
| SSIDs-to-VLANs Mapping | Allows to configure SSIDs-to-VLANs mapping in supported APs |
| Indoor AP | IAP-1800AX IAP-2400AX IAP-3600BE [2] IAP-3600BE-4PF [2] WDAP-3600BE WDAP-W3600BE WDAP-C5100BE WDAP-W3000AX WDAP-C3000AX WDAP-C7210E(V2) WDAP-C1800AX(V2) WDAP-W1800AXU WDAP-C7210E WDAP-W1200E WDAP-C7200E WDAP-W750E WNAP-C3220E WNAP-W2200UE |
| Outdoor AP | WDAP-3000AX WDAP-1800AX WDAP-850AC WDAP-802AC WBS-512AC WBS-502N WBS-202N WAP-552N WAP-252N WDAP-702AC WBS-502AC WBS-500N WBS-200N WAP-500N WAP-200N |
| Remarks | [1] The supported AP models may be changed after a firmware upgrade. [2] Planned via future firmware update. |
| Firewall Security | Cybersecurity Stateful Packet Inspection (SPI) Blocks DoS/DDoS attack |
| ALG (Application Layer Gateway) | SIP, RTSP, FTP, H.323, TFTP |
| NAT | Port forwarding DMZ Host UPnP |
| Content Filtering | MAC filtering IP filtering Web filtering |
| Bandwidth Management | Outbound load balancing Failover for dual-WAN QoS (Quality of Service) |
| Routing Protocol | Routing: Static routing Dynamic routing: RIP, OSPF |
| VLAN | 802.1q Tag-based, Port-based, Multi-VLAN |
| Multicast | IGMP Proxy |
| NAT Throughput | Up to 900 Mbps (test conditions TBA) |
| Outbound Load Balancing | Supported algorithms: Weight |
| Protocol | IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET DDNS, PLANET Easy DDNS, DHCP, PPPoE, SNMPv1/v2c/v3, |
| Key Features | HA (High Availability) Captive Portal RADIUS Server/Client AP Control |
| VPN | IPSec / Remote Server: Net-to-Net, Host-to-Net modes GRE (Generic Routing Encapsulation) PPTP Server L2TP Server SSL VPN Server / Client ( OpenVPN ) |
| VPN Tunnels | Up to 60 (test conditions TBA) |
| VPN Throughput | Up to 108 Mbps (test conditions TBA) |
| Encryption Methods | DES 3DES AES (AES-128 / AES-192 / AES-256) |
| Authentication Methods | MD5 SHA-1 SHA-256 SHA-384 SHA-512 |
| Basic Management Interfaces | Web browser SNMP v1, v2c PLANET Smart Discovery utility NMS controller supported |
| Secure Management Interfaces | SSHv2 TLS v1.2 SNMP v3 |
| System Log | System event log |
| Others | Setup wizard Dashboard System status / service monitoring Statistics Connection status Auto reboot Diagnostics |
| Regulatory Compliance | CE, FCC, E-Mark Vehicle Compliance Ready |
| Stability | IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration) |
| Operating | Temperature: -40 ~ 75 degrees C Relative humidity: 5 ~ 90% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative humidity: 5 ~ 90% (non-condensing) |
| Model | VCG-2406WP-NR |
|---|---|
| Copper Ports | Total: 4 × 10/100/1000BASE-T Ethernet ports, M12 8-pin X-coded female connectors Port assignments: Ports 1–2: LAN ports with IEEE 802.3at PoE (PSE) Port 3: Dedicated LAN port Port 4: Configurable LAN/WAN port |
| SIM Interface | 2 SIM card slots supporting Nano-SIM |
| Cellular Antenna | 4 × 5 dBi gain external antennas, SMA-type connectors, for 5G NR |
| Wireless Antenna | 2 × 2.4GHz and 5GHz dual-band external antennas with RP-SMA female connectors for Wi-Fi peak gain: 4.33 dBi @2.4GHz, 4.47 dBi @5GHz |
| DI & DO Interfaces | 1 x M12 A-coded 5-pin male connector for DI/DO and alarm interface Pin 1 for DI and Pin 2 for DO Pin 3/4 for Alarm Pin 5 for GND |
| Alarm | One relay output for port breakdown and power failure. Alarm relay current carry ability: 1A @ 24V DC |
| Digital Input (DI) | One digital input (DI) Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input load to 24V DC, 10mA max. |
| Digital Output (DO) | One digital output (DO) Open collector to 24V DC, 100mA max. |
| Power Connector | Connector type: M12 K-coded, 5-pin female Pin assignment: Pin 1: V1- Pin 2: V1+ Pin 3: V2+ Pin 4: V2− Pin PE: GND |
| Number of Power Input | 2 |
| Power Requirements | Input voltage: 9–54 V DC |
| Power Consumption | Max.10.2 watts/34.8BTU (Power on without any connection) Max. 81 watts/276.38 BTU (Full loading) |
| Enclosure | IP50 aluminum case |
| Reset Button | Press < 5 seconds: System reboot Press > 5 seconds: Restore factory default settings |
| Installation | Desktop Wall-mount |
| Weight | 1725g |
| Dimensions | 245 × 140.5 × 60 mm (W × D × H) |
| LED Indicators | System P1 ( Green ): Power 1 status P2 ( Green ): Power 2 status Alarm ( Red ): System alarm indicator I/O ( Red ): Digital input/output status Ethernet Interfaces (Ports 1–4) 10/100/1000 LNK/ACT ( Green ): Link/activity at 10/100/1000 Mbps PoE PoE ( Amber ): Link/activity Wi-Fi 2.4G ( Green ): 2.4 GHz Wi-Fi status 5G ( Green ): 5 GHz Wi-Fi status Cellular SIM SIM1 ( Green ): SIM card 1 status SIM2 ( Green ): SIM card 2 status Cellular Signal Strength 4 levels ( Green ): Indicates signal strength (1–4 LEDs lit) |
| 5G | NSA: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 SA: n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 |
| LTE | LTE-FDD: B1/ 2/ 3/ 4/ 5/ 7/ 8/ 12/ 13/ 14/ 17/ 18/ 19/ 20/ 25/ 26/ 28/ 29/ 30/ 32/ 66/ 71 LTE-TDD: B34/ 38/ 39/ 40/ 41/ 42/ 43/ 48 LAA: B46 |
| UMTS/WCDMA | B1/ 2/ 4/ 5/ 8/ 19 |
| GNSS | GPS/ GLONASS/ BDS/ Galileo/ QZSS |
| Data Transmission Throughput | 5G SA Sub-6 data rate Max. 2.4 Gbps (DL) / Max. 900 Mbps (UL) 5G NSA Sub-6 data rate Max. 3.4 Gbps (DL) / Max. 550 Mbps (UL) LTE data rate Max. 1.6 Gbps (DL) / Max. 200 Mbps (UL) WCDMA data rate Max. 42 Mbps (DL) / Max. 5.76 Mbps (UL) |
| PoE Standard | IEEE 802.3af / 802.3at PoE+ PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 54V DC, 36 watts (max.) |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Budget | 60 watts (max.) |
| Max. Number of Class 4 PDs | 2 |
| PoE Management | PD Alive Check Scheduled Power Recycling PoE Schedule PoE Usage Monitoring |
| Standard | IEEE 802.11a/n/ac/ax (5 GHz) IEEE 802.11g/b/n/ax (2.4 GHz) |
| Band Mode | 2.4 GHz and 5 GHz concurrent mode |
| Frequency Range | 2.4GHz FCC: 2.412~2.462GHz ETSI: 2.412GHz~2.472GHz 5GHz FCC: 5.150 – 5.850 GHz ETSI: 5.150 – 5.725 GHz |
| Operating Channels | 2.4GHz FCC: Channels 1–11 ETSI: Channels 1–13 5GHz FCC Non-DFS: 36, 40, 44, 48, 149, 153, 157, 161, 165 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 ETSI Non-DFS: 36, 40, 44, 48 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Note: 5 GHz channel availability may vary by country according to local regulations. |
| Modulation Type | 802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM) 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Channel Width | 20 MHz, 40 MHz, 80 MHz |
| Data Transmission Rates | Transmit: 600 Mbps* for 2.4 GHz and 1200 Mbps* for 5 GHz Receive: 600 Mbps* for 2.4 GHz and 1200 Mbps* for 5 GHz *The estimated transmission distance is based on the theory. The actual distance will vary in different environments. |
| Transmission Power | 11b:23 dBm ±1.5 dBm @11Mbps 11g:20 dbm ±1.5 dBm @54Mbps 11g/n:20 dBm ±1.5 dBm @MCS7, HT20 17 dBm@MCS7,HT40 11a:19.5 dBm ±1.5 dBm @54Mbps 11a/n:19.5 dBm ±1.5 dBm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20 dBm ±1.5 dBm @MCS8 11ac HT40: 17 dBm ±1.5 dBm @MCS9 11ac HT80: 14.5 dBm ±1.5 dBm @MCS9 11ax HT20: 20 dBm ±1.5 dBm @MCS9 11ax HT40: 17 dBm ±1.5 dBm @MCS9 11ax HT80: 14.5 dBm ±1.5 dBm @MCS11 |
| Encryption Security | WEP: 64/128-bit encryption WPA / WPA2: TKIP / AES encryption WPA-PSK / WPA2-PSK: TKIP / AES encryption WPA3-PSK (SAE): AES encryption only 802.1X Authenticator |
| Wireless Advanced | Wi-Fi Multimedia (WMM) Auto channel selection Wireless output power management MAC address filtering |
| Maximum Managed APs | 128 |
| Maximum AP Groups | 10 |
| Maximum APs per AP Group | 128 |
| Wireless Encryption/Security | WEP encryption security WPA Personal / Enterprise (TKIP / AES) WPA2 Personal / Enterprise (TKIP / AES) WPA3 Personal Enterprise Class 802.1x |
| AP Auto Discovery | Supports AP auto discovery |
| SSID/RF Profile | Allows multiple wireless profiles creation and maintenance |
| Cluster Management | Allows AP grouping for bulk provisioning and batch upgrading |
| Bulk AP Provisioning | Supports bulk AP provisioning with user-defined profiles |
| Bulk AP Firmware Upgrade | Supports bulk AP firmware upgrade |
| Coverage Heat Map | Enables real signal coverage of managed AP reflecting on the uploaded zone maps |
| Status Monitoring | Real-time traffic statistics reporting of AP and activated clients |
| Graphical Statistics | Real-time and historical visibility of traffic flow [2] |
| Profile Backup/Restoration | Provides SSID, radio profile backup/restoration |
| SSIDs-to-VLANs Mapping | Allows to configure SSIDs-to-VLANs mapping in supported APs |
| Indoor AP | IAP-1800AX IAP-2400AX IAP-3600BE [2] IAP-3600BE-4PF [2] WDAP-3600BE WDAP-W3600BE WDAP-C5100BE WDAP-W3000AX WDAP-C3000AX WDAP-C7210E(V2) WDAP-C1800AX(V2) WDAP-W1800AXU WDAP-C7210E WDAP-W1200E WDAP-C7200E WDAP-W750E WNAP-C3220E WNAP-W2200UE |
| Outdoor AP | WDAP-3000AX WDAP-1800AX WDAP-850AC WDAP-802AC WBS-512AC WBS-502N WBS-202N WAP-552N WAP-252N WDAP-702AC WBS-502AC WBS-500N WBS-200N WAP-500N WAP-200N |
| Remarks | [1] The supported AP models may be changed after a firmware upgrade. [2] Planned via future firmware update. |
| Firewall Security | Cybersecurity Stateful Packet Inspection (SPI) Blocks DoS/DDoS attack |
| ALG (Application Layer Gateway) | SIP, RTSP, FTP, H.323, TFTP |
| NAT | Port forwarding DMZ Host UPnP |
| Content Filtering | MAC filtering IP filtering Web filtering |
| Bandwidth Management | Outbound load balancing Failover for dual-WAN QoS (Quality of Service) |
| Routing Protocol | Routing: Static routing Dynamic routing: RIP, OSPF |
| VLAN | 802.1q Tag-based, Port-based, Multi-VLAN |
| Multicast | IGMP Proxy |
| NAT Throughput | Up to 900 Mbps (test conditions TBA) |
| Outbound Load Balancing | Supported algorithms: Weight |
| Protocol | IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET DDNS, PLANET Easy DDNS, DHCP, PPPoE, SNMPv1/v2c/v3, |
| Key Features | HA (High Availability) Captive Portal RADIUS Server/Client AP Control |
| VPN | IPSec / Remote Server: Net-to-Net, Host-to-Net modes GRE (Generic Routing Encapsulation) PPTP Server L2TP Server SSL VPN Server / Client ( OpenVPN ) |
| VPN Tunnels | Up to 60 (test conditions TBA) |
| VPN Throughput | Up to 108 Mbps (test conditions TBA) |
| Encryption Methods | DES 3DES AES (AES-128 / AES-192 / AES-256) |
| Authentication Methods | MD5 SHA-1 SHA-256 SHA-384 SHA-512 |
| Basic Management Interfaces | Web browser SNMP v1, v2c PLANET Smart Discovery utility NMS controller supported |
| Secure Management Interfaces | SSHv2 TLS v1.2 SNMP v3 |
| System Log | System event log |
| Others | Setup wizard Dashboard System status / service monitoring Statistics Connection status Auto reboot Diagnostics |
| Regulatory Compliance | CE, FCC, E-Mark Vehicle Compliance Ready |
| Stability | IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration) |
| Operating | Temperature: -40 ~ 75 degrees C Relative humidity: 5 ~ 90% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative humidity: 5 ~ 90% (non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק
