מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםבקשת מחיר בוואטסאפ058-444-4949פרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ

משלוח מהיר

משלוחים מהירים

עד 7 ימי עסקים בלבד

משלוח חינם

משלוחים חינם

בהזמנות מעל 2000 ש״ח

יעוץ לקניה

מענה מקצועי

הכוונה וייעוץ לפני רכישה

תשלום מאובטח

תשלום מאובטח

בהזמנות אונליין באתר

תיאור PLANET IGS-501T | מתג תעשייתי לא מנוהל | Industrial Unmanaged Ethernet Switch

PLANET IGS-501T — מתג תעשייתי לא מנוהל. מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.

Industrial Unmanaged Ethernet Switch. PLANET IGS-501T connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.

PLANET IGS-501T · מתגים תעשייתיים

מתג תעשייתי לא מנוהל — IGS-501T

PLANET IGS-501T מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.

חיבורים וממשקים

5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation

הזנה

9~48V DC, redundant power with polarity reverse protection function, 24V AC power support

התקנה

DIN-rail kit and wall-mount ear

מארז

IP30 metal case

טמפרטורת עבודה

Operating: -40~75 degrees C Storage: -40~75 degrees C

שילוב במערכת והתאמת החיבורים

בתכנון ארון תקשורת למפעל, מערכת בקרה או תשתית אבטחה, חשוב להתאים את מספר החיבורים ואת רוחב הפס לכל קצה. חיבורי Uplink, כאשר הם קיימים בדגם, משמשים לקישור לשאר הרשת. בממשק SFP יש להתאים את המודול, סוג הסיב ואורך הקו לשני קצות הקישור.

PLANET IGS-501T מתג תעשייתי לא מנוהל — Industrial Unmanaged Ethernet Switch
תמונת מוצר מקורית של היצרן.

נתונים לתכנון ההתקנה

טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.

PLANET IGS-501T — Industrial Unmanaged Ethernet Switch

The PLANET IGS-501T connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.

Integration and installation

For factory networks, control systems and surveillance infrastructure, plan both the number of device connections and the uplink capacity. Where SFP interfaces are provided, the transceiver type, fiber type and link distance must match the equipment at both ends. Copper and fiber ports are listed separately to make this planning easier.

Key model specifications

  • Ports and interfaces: 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
  • Power input: 9~48V DC, redundant power with polarity reverse protection function, 24V AC power support
  • Mounting: DIN-rail kit and wall-mount ear
  • Enclosure: IP30 metal case
  • Operating temperature: Operating: -40~75 degrees C Storage: -40~75 degrees C

Project planning

The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.

Technical Specifications — PLANET IGS-501T

SpecificationDetails
Manufacturer / ModelPLANET IGS-501T
Hardware Version5
Copper Ports5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
ConnectorRemovable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmProvides one relay output for power failure Alarm relay current carry ability: 1A@DC 24V
LED3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red: Power Alarm 2 x LED for each copper port ■ Green: 1000Mbps LNK/ACT ■ Amber: 10/100Mbps LNK/ACT0
ESD Protection6KV
EFT Protection6KV
Power Requirements9~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation2.8 watts/9.5BTU
InstallationDIN-rail kit and wall-mount ear
EnclosureIP30 metal case
Dimensions (W x D x H)32 x 87.8 x 135 mm
Weight430g
Switch Processing SchemeStore-and-Forward
Address Table2K entries
Buffer Memory4M bits on-chip buffer memory
Flow ControlBack pressure for half duplex IEEE 802.3x pause frame for full duplex
Switch Fabric10Gbps
Throughput (packet per second)7.4Mpps@64bytes
Jumbo Frame9K
Network Cables10/100/1000BASE-T Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters)
Standards ComplianceIEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration)
TemperatureOperating: -40~75 degrees C Storage: -40~75 degrees C
HumidityOperating: 5~90%, Storage: 5~90% (non-condensing)

מסמכי יצרן | Manufacturer Documents

Datasheet PDF

מידע נוסף

Model

IGS-501T

Hardware Version

5

Copper Ports

5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation

Connector

Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2

Alarm

Provides one relay output for power failure Alarm relay current carry ability: 1A@DC 24V

LED

3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red: Power Alarm 2 x LED for each copper port ■ Green: 1000Mbps LNK/ACT ■ Amber: 10/100Mbps LNK/ACT0

ESD Protection

6KV

EFT Protection

6KV

Power Requirements

9~48V DC, redundant power with polarity reverse protection function, 24V AC power support

Power Consumption / Dissipation

2.8 watts/9.5BTU

Installation

DIN-rail kit and wall-mount ear

Enclosure

IP30 metal case

Dimensions (W x D x H)

32 x 87.8 x 135 mm

Weight

430g

Switch Processing Scheme

Store-and-Forward

Address Table

2K entries

Buffer Memory

4M bits on-chip buffer memory

Flow Control

Back pressure for half duplex IEEE 802.3x pause frame for full duplex

Switch Fabric

10Gbps

Throughput (packet per second)

7.4Mpps@64bytes

Jumbo Frame

9K

Network Cables

10/100/1000BASE-T Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters)

Standards Compliance

IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service

Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration)

Temperature

Operating: -40~75 degrees C Storage: -40~75 degrees C

Humidity

Operating: 5~90%, Storage: 5~90% (non-condensing)

מוצרים דומים לPLANET IGS-501T | מתג תעשייתי לא מנוהל | Industrial Unmanaged Ethernet Switch

מצלמות אבטחה
אופטיקה
אינטרקום
פתרונות סולאריים
ציוד תקשורת
ארונות תקשורת חיצוניים
כבלים
מחשבים וציוד היקפי
ציוד מתח נמוך
מערכות הקלטה
מסכים לאינטרקום
נתבים
נקודת גישה ו WIFI
שליטה ובקרה
אביזרים לאינטרקום
מולטימדיה
ארונות תקשורת
ספקי כוח וסוללות
בקרת כניסה
מרכזיות טלפונים
מגדילי טווח
מתאם רשת
מערכות אזעקה
מתגים וסוויצי'ים