מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםפרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ
עד 7 ימי עסקים בלבד
בהזמנות מעל 2000 ש״ח
הכוונה וייעוץ לפני רכישה
בהזמנות אונליין באתר
PLANET IMS-6325-5 — מתג תעשייתי מנוהל L3. מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.
Industrial L3 Managed Ethernet Switch. PLANET IMS-6325-5 connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.
PLANET IMS-6325-5 · מתגים תעשייתיים
PLANET IMS-6325-5 מיועד לחיבור ציוד Ethernet בתשתיות תקשורת תעשייתיות. תצורת החיבורים של הדגם מאפשרת לרכז התקני קצה בארון התקשורת ולשלב אותם ברשת המקומית, בהתאם למהירויות ולממשקים המפורטים בהמשך.
4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Dual 12~48V DC power inputs
DIN-rail or wall-mount kit
IP30 metal case
-40 ~ 75 degrees C
בתכנון ארון תקשורת למפעל, מערכת בקרה או תשתית אבטחה, חשוב להתאים את מספר החיבורים ואת רוחב הפס לכל קצה. חיבורי Uplink, כאשר הם קיימים בדגם, משמשים לקישור לשאר הרשת. בממשק SFP יש להתאים את המודול, סוג הסיב ואורך הקו לשני קצות הקישור.
הדגם כולל תמיכה ב־VLAN, QoS, ACL, LACP, ERPS, SNMP, IPv6 לפי המפרט. יכולות אלה מאפשרות להתאים את הגדרות הרשת לפרויקט; מגדירים כל תכונה לפי תכנון התעבורה וממשקי הציוד המחובר.
טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET IMS-6325-5 connects Ethernet equipment in industrial network installations. Its port configuration brings local devices into the network, with the supported copper and fiber interfaces detailed below. Select the exact interfaces and link speeds required by the connected equipment.
For factory networks, control systems and surveillance infrastructure, plan both the number of device connections and the uplink capacity. Where SFP interfaces are provided, the transceiver type, fiber type and link distance must match the equipment at both ends. Copper and fiber ports are listed separately to make this planning easier.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET IMS-6325-5 |
| Copper Ports | 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP+ Slots | 4 10GBASE-SR/LR SFP+ interfaces (Ports 9-12); backward compatible with 1G/2.5GBASE-X SFP transceivers |
| Expansion Slots | Supports up to 5 modules for flexible port configuration, including: IMS-4T: 4-port 10/100/1000BASE-T RJ45 IMS-4S: 4-port 100/1G SFP slot IMS-4P-E: 4-Port 10/100/1000T 802.3bt PoE++ Switch Module |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Reset Button | < 5 sec: reboot > 5 sec: factory default reset |
| ESD Protection | Contact: 6KV DC; Air: 8KV DC |
| Connector | 6-pin terminal block for power input (DC1 & DC2), and 6-pin terminal block for DI/DO interfaces |
| Alarm | 2-pin relay alarm for power failure; alarm relay current carry ability: 1A @ 24V DC |
| Digital Input (DI) | 2 digital input (DI): Level 0: -24V~2.1V (±0.1V) Input load to 24VDC, 10mA max. Level 1: 2.1V~24V (±0.1V) |
| Digital Output (DO) | 2 digital output (DO): Open collector to 24V DC, 100mA max. |
| Enclosure | IP30 metal case |
| Installation | DIN-rail or wall-mount kit |
| SDRAM | 512MB x 4 |
| Flash Memory | 128MB |
| Dimensions (W x D x H) | 217 x 135 x 152 mm |
| Weight | 3,590g |
| Power Requirements | Dual 12~48V DC power inputs |
| Power Consumption | DC 12V (Dual input) Expansion Slots No Loading Full Loading Max. Current No expansion cards 12.48W / 42.57 BTU 24.84W / 84.77 BTU 2.5A IMS-4T x 5 20.16W / 68.83 BTU 44.64W / 152.32 BTU 3.72A IMS-4S x 5 20.16W / 68.83 BTU 53.76W / 183.40 BTU 4.48A DC 48V (Dual Input) Expansion Slots No Loading Full Loading Max. Current No expansion cards 18.72W / 63.87 BTU 31.20W / 106.46 BTU 0.9A IMS-4T x 5 26.88W / 91.68 BTU 44.64W / 152.32 BTU 1.01A IMS-4S x 5 26.88W / 91.68 BTU 54.72W / 186.74 BTU 1.14A IMS-4P-E with dedicated 48~54V DC power input Expansion Slots No Loading Full Loading Max. Current IMS-4P-E (DC 48V) NA 194W / 661 BTU 4.05A IMS-4P-E (DC 54V) NA 185W / 631 BTU 3.42A |
| LED Indicators | System P1 ( Green ) P2 ( Green ) Alarm ( Red ) Ring ( Green ) R.O. ( Green ) I/O ( Red ) RJ45 Ports (Ports 1 to 4) 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ) 10G SFP+ Slot (Ports 5 to 8) 10G LNK/ACT ( Amber ); 1G/2.5G LNK/ACT ( Green ) IMS-4T (4-port 10/100/1000T RJ45 copper module) Status: On ( Green ) RJ45 port: 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ) IMS-4S (4-Port 100/1000BASE-X SFP slot module) Status: On ( Green ) Gigabit SFP slot: 1000 LNK/ACT ( Green ); 100 LNK/ACT ( Amber ) IMS-4P-E (4-Port 10/100/1000T 8023.bt PoE++ module) Status: On ( Green ) Module Power: On ( Green ) 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ), bt PoE ( Green ); at PoE ( Amber ) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 128Gbps/non-blocking |
| Throughput (packet per second) | 95.2Mpps@ 64 bytes packet |
| Address Table | 32K entries, automatic source address learning and aging |
| Shared Data Buffer | 32M bits |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Jumbo Frame | 10K bytes |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 4K routing table entries |
| Routing Protocols | IPv4 RIPv1/v2 dynamic routing IPv4 OSPFv2 dynamic routing IPv6 OSPFv3 dynamic routing IPv4/IPv6 hardware static routing |
| Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port link capability control |
| Port Status | Display each port's speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
| Port Mirroring | TX / RX / Both Many-to-1 monitor RMirror – Remote Switched Port Analyzer (Cisco RSPAN) Supports up to 5 sessions |
| VLAN | IEEE 802.1Q tag-based VLAN IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP (GARP VLAN Registration Protocol) Up to 4K VLAN groups, out of 4096 VLAN IDs |
| Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol Supports 7 MSTP instances BPDU Guard, BPDU filtering and BPDU transparent Root Guard |
| IGMP Snooping | IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Up to 2K multicast groups |
| MLD Snooping | IPv6 MLD (v1/v2) snooping IPv6 MLD querier mode support Up to 512 multicast groups |
| Bandwidth Control | Per port bandwidth control Ingress: 10Kbps~13000Mbps Egress: 100Kbps~13000Mbps |
| Ring | Supports ERPS, and complies with ITU-T G.8032 Recovery time < 10ms @ 3 nodes Recovery time < 50ms @ 16 nodes Supports Major ring and sub-ring |
| Synchronization | IEEE 1588v2 PTP (Precision Time Protocol) Peer-to-peer transparent clock End-to-end transparent clock |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching Port number 802.1p priority 802.1Q VLAN tag DSCP/TOS field in IP packet |
| Access Control List | IP-based ACL/MAC-based ACL ACL based on: MAC Address IP Address Ethertype Protocol Type VLAN ID DSCP 802.1p Priority Up to 512 entries |
| Security | Port security IP source guard, up to 512 entries Dynamic ARP inspection, up to 1K entries Command line authority control based on user level Static MAC address, up to 64 entries |
| AAA | RADIUS client TACACS+ client |
| Network Access Control | IEEE 802.1x port-based network access control MAC-based authentication Local/RADIUS authentication |
| Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
| Secure Management Interfaces | SSHv2, TLSv1.2, SNMP v3 |
| System Management | Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP Remote Syslog System log LLDP protocol NTP PLANET Smart Discovery Utility PLANET CloudNMS |
| SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB IEEE 802.1X PAE RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP PowerEthernet MIB |
| PoE PSE | 802.3bt mode/End-span mode/Mid-span mode |
| Power Budget | Max. 180 watts@25 degrees C Max. 120 watts@60 degrees C |
| Enhanced PoE Mode | Standard/ Legacy/Force |
| PoE Management | PD Alive Check |
| Active PoE Device Live Detection | Yes |
| PoE Power Recycling | Yes, daily or predefined schedule |
| PoE Schedule | 4 schedule profiles |
| PoE Extend Mode | Yes, max. up to 250 meters |
| Regulatory Compliance | FCC Part 15 Class A CE: EN55032 EN55035 |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3ae 10Gigabit Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ah OAM IEEE 1588 PTPv2 RFC 768 UDP RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 RFC 2328 OSPF v2 RFC 5340 OSPF v3 RFC 2453 RIP v2 ITU-T G.8032 ERPS Ring |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Model | IMS-6325-5 |
|---|---|
| Copper Ports | 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP+ Slots | 4 10GBASE-SR/LR SFP+ interfaces (Ports 9-12); backward compatible with 1G/2.5GBASE-X SFP transceivers |
| Expansion Slots | Supports up to 5 modules for flexible port configuration, including: IMS-4T: 4-port 10/100/1000BASE-T RJ45 IMS-4S: 4-port 100/1G SFP slot IMS-4P-E: 4-Port 10/100/1000T 802.3bt PoE++ Switch Module |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Reset Button | < 5 sec: reboot > 5 sec: factory default reset |
| ESD Protection | Contact: 6KV DC; Air: 8KV DC |
| Connector | 6-pin terminal block for power input (DC1 & DC2), and 6-pin terminal block for DI/DO interfaces |
| Alarm | 2-pin relay alarm for power failure; alarm relay current carry ability: 1A @ 24V DC |
| Digital Input (DI) | 2 digital input (DI): Level 0: -24V~2.1V (±0.1V) Input load to 24VDC, 10mA max. Level 1: 2.1V~24V (±0.1V) |
| Digital Output (DO) | 2 digital output (DO): Open collector to 24V DC, 100mA max. |
| Enclosure | IP30 metal case |
| Installation | DIN-rail or wall-mount kit |
| SDRAM | 512MB x 4 |
| Flash Memory | 128MB |
| Dimensions (W x D x H) | 217 x 135 x 152 mm |
| Weight | 3,590g |
| Power Requirements | Dual 12~48V DC power inputs |
| Power Consumption | DC 12V (Dual input) Expansion Slots No Loading Full Loading Max. Current No expansion cards 12.48W / 42.57 BTU 24.84W / 84.77 BTU 2.5A IMS-4T x 5 20.16W / 68.83 BTU 44.64W / 152.32 BTU 3.72A IMS-4S x 5 20.16W / 68.83 BTU 53.76W / 183.40 BTU 4.48A DC 48V (Dual Input) Expansion Slots No Loading Full Loading Max. Current No expansion cards 18.72W / 63.87 BTU 31.20W / 106.46 BTU 0.9A IMS-4T x 5 26.88W / 91.68 BTU 44.64W / 152.32 BTU 1.01A IMS-4S x 5 26.88W / 91.68 BTU 54.72W / 186.74 BTU 1.14A IMS-4P-E with dedicated 48~54V DC power input Expansion Slots No Loading Full Loading Max. Current IMS-4P-E (DC 48V) NA 194W / 661 BTU 4.05A IMS-4P-E (DC 54V) NA 185W / 631 BTU 3.42A |
| LED Indicators | System P1 ( Green ) P2 ( Green ) Alarm ( Red ) Ring ( Green ) R.O. ( Green ) I/O ( Red ) RJ45 Ports (Ports 1 to 4) 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ) 10G SFP+ Slot (Ports 5 to 8) 10G LNK/ACT ( Amber ); 1G/2.5G LNK/ACT ( Green ) IMS-4T (4-port 10/100/1000T RJ45 copper module) Status: On ( Green ) RJ45 port: 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ) IMS-4S (4-Port 100/1000BASE-X SFP slot module) Status: On ( Green ) Gigabit SFP slot: 1000 LNK/ACT ( Green ); 100 LNK/ACT ( Amber ) IMS-4P-E (4-Port 10/100/1000T 8023.bt PoE++ module) Status: On ( Green ) Module Power: On ( Green ) 1000 LNK/ACT ( Green ); 10/100 LNK/ACT ( Amber ), bt PoE ( Green ); at PoE ( Amber ) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 128Gbps/non-blocking |
| Throughput (packet per second) | 95.2Mpps@ 64 bytes packet |
| Address Table | 32K entries, automatic source address learning and aging |
| Shared Data Buffer | 32M bits |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Jumbo Frame | 10K bytes |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 4K routing table entries |
| Routing Protocols | IPv4 RIPv1/v2 dynamic routing IPv4 OSPFv2 dynamic routing IPv6 OSPFv3 dynamic routing IPv4/IPv6 hardware static routing |
| Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port link capability control |
| Port Status | Display each port's speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
| Port Mirroring | TX / RX / Both Many-to-1 monitor RMirror – Remote Switched Port Analyzer (Cisco RSPAN) Supports up to 5 sessions |
| VLAN | IEEE 802.1Q tag-based VLAN IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP (GARP VLAN Registration Protocol) Up to 4K VLAN groups, out of 4096 VLAN IDs |
| Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol Supports 7 MSTP instances BPDU Guard, BPDU filtering and BPDU transparent Root Guard |
| IGMP Snooping | IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Up to 2K multicast groups |
| MLD Snooping | IPv6 MLD (v1/v2) snooping IPv6 MLD querier mode support Up to 512 multicast groups |
| Bandwidth Control | Per port bandwidth control Ingress: 10Kbps~13000Mbps Egress: 100Kbps~13000Mbps |
| Ring | Supports ERPS, and complies with ITU-T G.8032 Recovery time < 10ms @ 3 nodes Recovery time < 50ms @ 16 nodes Supports Major ring and sub-ring |
| Synchronization | IEEE 1588v2 PTP (Precision Time Protocol) Peer-to-peer transparent clock End-to-end transparent clock |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching Port number 802.1p priority 802.1Q VLAN tag DSCP/TOS field in IP packet |
| Access Control List | IP-based ACL/MAC-based ACL ACL based on: MAC Address IP Address Ethertype Protocol Type VLAN ID DSCP 802.1p Priority Up to 512 entries |
| Security | Port security IP source guard, up to 512 entries Dynamic ARP inspection, up to 1K entries Command line authority control based on user level Static MAC address, up to 64 entries |
| AAA | RADIUS client TACACS+ client |
| Network Access Control | IEEE 802.1x port-based network access control MAC-based authentication Local/RADIUS authentication |
| Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
| Secure Management Interfaces | SSHv2, TLSv1.2, SNMP v3 |
| System Management | Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP Remote Syslog System log LLDP protocol NTP PLANET Smart Discovery Utility PLANET CloudNMS |
| SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB IEEE 802.1X PAE RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP PowerEthernet MIB |
| PoE PSE | 802.3bt mode/End-span mode/Mid-span mode |
| Power Budget | Max. 180 watts@25 degrees C Max. 120 watts@60 degrees C |
| Enhanced PoE Mode | Standard/ Legacy/Force |
| PoE Management | PD Alive Check |
| Active PoE Device Live Detection | Yes |
| PoE Power Recycling | Yes, daily or predefined schedule |
| PoE Schedule | 4 schedule profiles |
| PoE Extend Mode | Yes, max. up to 250 meters |
| Regulatory Compliance | FCC Part 15 Class A CE: EN55032 EN55035 |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3ae 10Gigabit Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ah OAM IEEE 1588 PTPv2 RFC 768 UDP RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 RFC 2328 OSPF v2 RFC 5340 OSPF v3 RFC 2453 RIP v2 ITU-T G.8032 ERPS Ring |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק
