מחיר וייעוץ למוצר הזהדברו עם יועץ ובחרו את הפתרון שמתאים לכםבקשת מחיר בוואטסאפ058-444-4949פרטי המוצר מצורפים אוטומטית להודעת הוואטסאפ

עד 7 ימי עסקים בלבד

בהזמנות מעל 2000 ש״ח

הכוונה וייעוץ לפני רכישה

בהזמנות אונליין באתר
PLANET IPOE-162 — מזרק PoE תעשייתי PoE+. מוסיף הזנת PoE לקישור Ethernet עבור התקן קצה תואם. המכשיר מקבל נתונים ומתח ממקורות מתאימים ומעביר אותם דרך יציאת ה־PoE, בהתאם לתקן ולהספק של הדגם.
Industrial PoE+ Injector. PLANET IPOE-162 adds PoE power to an Ethernet link for a compatible powered device. It combines the data connection with an appropriate power source and delivers them through its PoE output, within the model-specific standard and power budget.
PLANET IPOE-162 · פתרונות PoE תעשייתיים
PLANET IPOE-162 מוסיף הזנת PoE לקישור Ethernet עבור התקן קצה תואם. המכשיר מקבל נתונים ומתח ממקורות מתאימים ומעביר אותם דרך יציאת ה־PoE, בהתאם לתקן ולהספק של הדגם.
Input Port: 1 x RJ45 STP (Data In) Output Port: 1 x RJ45 STP (Data + Power Out) Input Power Terminal Block: 1
IEEE 802.3at Power over Ethernet Plus / mid-span PSE
DIN-rail kit and wall-mount ear
IP30 slim metal case
-40 ~ 75 degrees C
המזרק מתאים לפרויקט שבו קיים חיבור רשת וצריך להוסיף הזנה דרך הכבל. לפני החיבור בודקים את תקן ה־PoE של התקן הקצה, דרישת ההספק, מהירות הנתונים ומתח הכניסה של המזרק. ההספק הזמין תלוי גם במקור ההזנה ובתנאי הכבילה.

טבלת המפרט באנגלית מרכזת את נתוני הדגם לצורך השוואה והתאמה טכנית. יש להתאים את ההזנה, החיבורים ותנאי הסביבה לערכים המפורטים. צוות סיבים מסייע בבחירת הציוד והתצורה המתאימים לפרויקט.
The PLANET IPOE-162 adds PoE power to an Ethernet link for a compatible powered device. It combines the data connection with an appropriate power source and delivers them through its PoE output, within the model-specific standard and power budget.
Use an injector when an Ethernet connection is available and power needs to be added to the cable. Check the powered device’s PoE standard, power requirement, data speed and the injector’s input voltage. Available output also depends on the upstream supply and cabling conditions.
The technical table below provides the model-specific information for comparison and system design. Match the power source, connectors and environmental conditions to these ratings. SIVIM can assist with equipment selection and configuration for the project.
| Specification | Details |
|---|---|
| Manufacturer / Model | PLANET IPOE-162 |
| Hardware Version | 3 |
| Interface | Input Port: 1 x RJ45 STP (Data In) Output Port: 1 x RJ45 STP (Data + Power Out) Input Power Terminal Block: 1 |
| LED Indicator | System: Power 1 ( Green ) Power 2 ( Green ) Fault ( Red ) PoE Port: PoE-in-use x 1 ( Orange ) |
| Network Cable | 10BASE-T: UTP Cat. 3, 4, 5, up to 100m (328ft) 100BASE-TX: UTP Cat. 3, 4, 5, up to 100m (328ft) 1000BASE-T: UTP Cat. 5, 5e, 6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m) |
| Data Rate | 10/100/1000Mbps |
| Dimensions (W x D x H) | 32 x 87.8 x 135 mm |
| Weight | 489g |
| Unit Input Voltage | 12 ~ 48V DC |
| Power Consumption | 32 watts max. |
| Number of devices can be powered | 1 |
| Installation | DIN-rail kit and wall-mount ear |
| Alarm | Provides one relay output for power failure; alarm relay current carry ability: 3A @ DC 24V |
| Enclosure | IP30 slim metal case |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus / mid-span PSE |
| PoE Power Output | 30 watts |
| PoE Power Supply Type | Mid-span |
| Power Pin Assignment | 4/5(+), 7/8(-) |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Regulatory Compliance | FCC Part 15B Class A, CE |
| Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Model | IPOE-162 |
|---|---|
| Hardware Version | 3 |
| Interface | Input Port: 1 x RJ45 STP (Data In) Output Port: 1 x RJ45 STP (Data + Power Out) Input Power Terminal Block: 1 |
| LED Indicator | System: Power 1 ( Green ) Power 2 ( Green ) Fault ( Red ) PoE Port: PoE-in-use x 1 ( Orange ) |
| Network Cable | 10BASE-T: UTP Cat. 3, 4, 5, up to 100m (328ft) 100BASE-TX: UTP Cat. 3, 4, 5, up to 100m (328ft) 1000BASE-T: UTP Cat. 5, 5e, 6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m) |
| Data Rate | 10/100/1000Mbps |
| Dimensions (W x D x H) | 32 x 87.8 x 135 mm |
| Weight | 489g |
| Unit Input Voltage | 12 ~ 48V DC |
| Power Consumption | 32 watts max. |
| Number of devices can be powered | 1 |
| Installation | DIN-rail kit and wall-mount ear |
| Alarm | Provides one relay output for power failure; alarm relay current carry ability: 3A @ DC 24V |
| Enclosure | IP30 slim metal case |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus / mid-span PSE |
| PoE Power Output | 30 watts |
| PoE Power Supply Type | Mid-span |
| Power Pin Assignment | 4/5(+), 7/8(-) |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Regulatory Compliance | FCC Part 15B Class A, CE |
| Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
© כל הזכויות שמורות לסיבים תשתיות תקשורת
פרסום בפייסבוק ע"י קרית טק